Frequently Asked Questions
1) Is Bacillocid® Special, a concentrate or a ready-to-use product?
Bacillocid® Special is supplied as a concentrate product, which has to be diluted with water (as per Raman & Weil’s dilution chart & risk area of the hospital) for surface & environmental disinfection.
2) Should I add a higher concentration of Bacillocid® Special for better results?
For Bacillocid® Special, refer and follow the dilution instructions given in Raman & Weil’s product literature to get the best results.
3) What makes Bacillocid® Special the perfect choice for surface disinfection?
Bacillocid® Special is the perfect choice for surface disinfection because of the following-
- Dual property of CLEANING & DISINFECTION
- Passes relevant EN norms
- Requires short contact time.
- It is effective against Clostridium difficile spores, bacteria (mycobacteria), yeast, fungi, and enveloped & non – enveloped viruses.
- It contains corrosion inhibitors that protect the surface.
4) How should you use Bacillocid® Special for surface mopping?
Use Bacillocid® Special based on the risk area of the hospital and follow the steps below. Refer to Raman & Weil’s dilution chart for the dilutions.
- Use a PPE kit for protection while disinfecting the surface.
- Always clean the surface, and remove all visible dirt.
- Add the concentrate using a measuring funnel/beaker into the bucket.
- Now add the required tap water & dilute the solution.
- Conduct surface mopping using the correct technique.
- While doing this, ensure the fans/ACs are off, and windows are closed.
- Follow the exposure time of 15 – 20 mins.
- Allow the surface to air dry.
(Do not over or underuse the disinfectant).
5) Can you use Bacillocid® Special for fogging?
Yes, Bacillocid® Special can be used for fogging.
